SunWind's solar panels are made with polycrystalline solar
cells mounted to a firm substrate with clear epoxy encapsulation. They
are marked for
polarity and come with rugged alligator
clip test leads (15 cm, 6") attached, for active experimentation. PV panels can be
joined in series to produce higher voltages, or in parallel for higher
amperages.
SunWind solar panels come in two
sizes: 1 volt,
and 1.5 volt. Both produce well over 500
mAmps in full sunlight (or close to a bright lamp).
1 volt x 500 mAmps = 0.5
watts.
The physical dimensions of the 1
volt
panel
are 60 x 70 mm (~2.5 x 2.75 inches)
TO ORDER: please click
your country's Catalogue on the left.
1.5 volts
x 500 mAmps = 0.75 watts.
The physical dimensions of the 1.5 volt panels
are
70
x 90 mm (2.75 x 3.5 inches).